Introduction; Intended Use; Features; Package Contents - Parkside PDFP 500 B2 Originalbetriebsanleitung

PNEUMATIC PAINT SPRAY GUN
PDFP 500 B2

Introduction

Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
GB
for the range of applications specified. Please also
MT
pass these operating instructions on to any future
owner.

Intended use

This compressed air-powered appliance is designed
solely for the application/spraying of solvent-based
and water-soluble paints, glazes, foundation, clear
varnishes, vehicle paints, stains, wood preserva-
tives, pesticides, oils and disinfectants. The appli-
ance is not suitable for working with emulsions
or latex paints, lye, acidic coatings, granular and
gritty spray materials or spray- or drip-resistant
materials. Any other usage of or modification to the
appliance is deemed to be improper and carries
a significant risk of accidents. The manufacturer
accepts no responsibility for damage(s) resulting
from improper usage. This appliance is intended
for domestic use only.
Symbols on the compressed air tool:
Read the operating instructions
WARNING!
before use.
Always wear safety goggles.
Always wear a mask.
Always wear hearing protection.
Always wear protective gloves.
32

Features

Venting
Flow cup lid
Flow cup
Stroke limiter screw (paint flow-rate control)
Control for round/broad jet
Compressed-air connection
Airflow control
Trigger
Nozzle head
Needle
Spring
Brush
Filter
Inner screw thread (flow cup)

Package contents

1 pneumatic paint spray gun PDFP 500 B2
1 flow cup
1 flow cup lid
1 cleaning brush
1 filter
1 set of operating instructions

Technical details

Max. working pressure: 3 bar
Nozzle size: Ø 1.4 mm
Flow cup: approx. 500 ml
Recommended viscosity: 18–23 DIN / Sec.
Noise emission value:
Noise measurement value determined in accordance
with EN 14462. The rated noise level at the working
location is typically as follows:
Sound pressure level:
Uncertainty:
L = 72.1 dB(A)
pA
K = 2.5 dB
pA
PDFP 500 B2