Canon RS-CL17 Zusammenbau- Und Installationsanleitung Seite 9

2 Let the projector stand with the back side
facing down and bottom facing front.
● Handle the product with two or more
people.
Caution
3 Remove the adjusting legs (4 pcs) from
the projector bottom.
● Be sure to keep the removed
adjusting legs safely for later use.
Caution
4 Fix the anti-fall wire terminal clamps on
the two screw holes (A) as shown right by
fixing the M6 screws through M6 washers
and M6 spring washers.
5 Fix the two screws removed in Step 3-2
on the two screw holes (B) as shown
right.
● Fix M6 screws starting from the
upper hole (A).
● Ti g h t e n t h e s c r e w s f i r m l y s o
that they are fixed without any
looseness.
Caution
● Insert the anti-fall wire through
the cutting on the arm plate A (2
positions).
6 Return the projector to its original position.
Bottom Side
B
A
B
A
A
7