Service Schedule; Handover Confirmation; Service Confirmation - Stihl Rma 339 C Gebrauchsanleitung

Fault:
Charging fails to start after inserting
battery into charger
Possible cause:
– Battery too cold/too warm – 1 LED
illuminates red on battery
– No electrical contact between charger
and battery
– Charger power supply faulty
Remedy:
– Leave battery inserted in charger
Charging starts automatically as soon
as permissible temperature range is
reached.
– Remove and re-insert battery (
– Connect charger to mains (
– Check mains power supply
– Check charger, replace if necessary
( )
Fault:
Battery is not charged, no LED illuminates
Possible cause:
– No electrical contact between charger
and battery
– Charger power supply faulty
Remedy:
– Remove battery from battery
compartment and reinsert (
– Connect charger to the mains (
– Check mains power supply
– Check charger, replace if necessary
( )
Fault:
LED on charger flashes red
Possible cause:
– No electrical contact between charger
and battery
0478 131 9927 B - EN
– Battery defective (4 LEDs on the
battery flash red for approx. 5 seconds)
– Charger defective
Remedy:
– Remove battery from battery
compartment and reinsert (
– Check battery, replace if necessary ( )
– Check charger, replace if necessary
( )

21. Service schedule

21.1 Handover confirmation

8.3)
8.2)
8.3)
8.2)

21.2 Service confirmation

Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
Service performed on
Next service date
8.3)
27
59