Velleman BTSP3 Bedienungsanleitung Seite 4

4. Features
• only one multi-function control button
• small lightweight headset
• comfortable earphone
• auto-reconnect
• supports voice dialing
• comes with Bluetooth® headset, USB charging cable, multilingual
user manual and flexible detachable ear-hook
5. Overview
Refer to the illustration on page 2 of this manual.
1 multi-function button
2 LED indicator
3 charging port
6. Operation
Note: prior to using the BTSP3 for the first time, it should be
charged fully (see §7).
Switching the headset on/off
• Press and hold the multi-function button [1] for ±5 seconds to
switch the headphone on. The LED indicator [2] will flash blue 4
times, and a low beep is heard in the earphone [4].
• When on, the LED indicator [2] will flash blue ± every 6s.
• Press and hold the multi-function button [1] for ±5 seconds to
switch the headphone off. The LED indicator [2] will flash red 2
times, and a high beep is heard in the earphone [4].
pairing
The device must be associated with a Bluetooth
phone before use.
• Make sure the headset is switched off.
• Press and hold the multi-function button [1] for ±6s until the LED
indicator [2] flashes red and blue.
• Enable the Bluetooth
• On the mobile phone, select BTSP3 and enter the password
(0000) to confirm pairing.
• Once paired, the headset will automatically connect to the mobile
device when it is within range.
• Note that some mobile phones will not connect until a call is
received or made.
answer/end a phone call
• Verify that the LED indicator [2] flashes blue (interval ±6s).
• Press the multi-function button [1] once to answer the call.
• Press the multi-function button [1] again to end the call.
01.02.2011
BTSP3
4 earphone
5 microphone
6 ear-hook
®
function on the mobile device (not incl.).
4
®
compatible mobile
©Velleman nv
Rev. 01