Original Accessories/Auxiliary Equipment; Setting Up; Additional Handle; Depth Stop - Parkside PSBM 1100 A1 Originalbetriebsanleitung

WARNING!
► The power tool creates an electromagnetic
field during operation . This field can, in cer-
tain circumstances, impair active or passive
medical implants . To reduce the risk of fatal
injuries, we recommend that people with
medical implants consult their doctor and the
manufacturer of the medical implant before
operating this machine .
Original accessories/auxiliary
equipment
■ Use only the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance .

Setting up

WARNING!
► Switch the appliance off and remove the
power plug before starting any work on the
appliance .

Additional handle

NOTE
► For safety reasons, you should only use this ap-
pliance with the additional handle
♦ Loosen the strap on the additional handle
by turning it clockwise .
♦ Push the additional handle
release chuck .
♦ Turn the additional handle
position .
♦ The locking positions on the additional handle
must now be pushed over the two locking pins
on the spindle of the appliance .
♦ Turn the additional handle
again to tighten it .
NOTE
► Move the additional handle
various locking positions depending on your
working position . Undo and lock the additional
handle as described previously .
■ 6 │ GB │ IE │ NI

Depth stop

♦
♦
♦
♦
♦

Changing tools

The appliance has a fully automatic spindle lock .
♦
♦
♦
♦
attached .

Attaching the dust extractor

over the quick-
shavings can ignite parts of the extractor.
to the required
anticlockwise
♦
♦
into the
Push the toggle button for the depth stop
and keep it pushed in .
Insert the depth stop
handle .
Make sure that the teeth on the depth stop
point upwards and downwards .
Pull the depth stop
between the tip of the drill and the tip of the
depth stop corresponds with the required drilling
depth .
Release the toggle button for the depth stop
to lock the depth stop
When the motor is stopped, the power train
locks so that the quick-release chuck
opened by turning it towards
Insert the desired tool into the quick-release
chuck .
Turn the quick-release chuck
GRIP
to tighten the tool .
The spindle lock is automatically released when
the motor starts (ON/OFF switch
CAUTION! RISK OF FIRE! Do not
work on metallic materials while the
dust extractor is attached. Hot metal
NOTE
► Do not use the dust extractor
wood or plastic shavings . They can jam the
dust extractor .
Use the wing screw
tractor to the additional handle
It is best to use a workshop extractor .
Connect the extractor hose to the dust extraction
adapter .
into the additional
out until the distance
.
can be
RELEASE .
towards
pressed) .
to extract
to attach the dust ex-
(cf . Fig . A) .
PSBM 1100 A1