General Power Tool Safety Warnings; Work Area Safety - Parkside FAHE 20-Li A1 Originalbetriebsanleitung

Wear a hard hat!
Wear safety goggles!
Keep bystanders away from the
appliance!
Do not use chain saw one-handed!
Always use chain saw two-handed!
Beware of chain saw kickback
and avoid contact with bar tip!
Protect the appliance against
rain or moisture!
Risk of fatal electrical shock!
Keep at least 10 m away from
overhead power lines.
Caution! Falling objects.
Especially when cutting above
head height.
Beware of thrown objects!
Caution! Risk of injury due to
running blades.
Sound power level LWA data
in dB.
Turn the device off and remove
the battery pack before per-
forming any maintenance work!!
15 min
A full tank will last for approx. 15
OIL
minutes of continuous operation.
Running direction of the chain!
Oil filler cap
│ GB │ IE │ NI │ CY
■ 4
Minimum / maximum level indi-
MIN / MAX
cator of the oil tank.
Tighten!
Release!
The arrow direction marks the
selected position.
Press in the direction of the
arrow.
General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the safety instructions and
other instructions may result in electric shock,
fire and/or serious injury.
NOTE
► National regulations may restrict the use of
the appliance.
Save all safety instructions and other instruc-
tions for future reference.
The term "power tool" in the safety instructions
refers to your mains-operated (cable) power tools
or battery-operated (cableless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
PAHE 20-Li A1