English; Changing The Battery - IKEA TRÅDFRI Bedienungsanleitung

ENGLISH

WIRELESS ON/OFF SWITCH FUNCTIONS
ON - Dim UP
Press to turn your IKEA Home smart product
on. Press and hold to dim up.
OFF - Dim DOWN
Press to turn your IKEA Home smart product
off. Press and hold to dim down.
Pairing: Add IKEA Home smart products to
your system. See instructions below.
ADDING DEVICES TO YOUR
WIRELESS ON/OFF SWITCH
When the wireless ON/OFF switch is sold together
with an IKEA Home smart product (in the same
package), they are already paired.
To add more products, just repeat the steps below:
Make sure that the main power is turned on.
1 Hold the ON/OFF switch close to the IKEA Home
smart device you want to add (no more than 5
cm away).
2 Press and hold the pairing button for at least 10
seconds, you can find the pairing button under
the rear cover.
3 A red light will shine steadily on the ON/OFF
switch. On your IKEA Home smart device the
pairing indicator will begin to dim and flash one
time to indicate that it has been successfully
paired.
Up to 10 IKEA Home smart devices can be paired
with 1 ON/OFF switch.
Make sure to pair them one at a time. If the IKEA
Home smart products are close to each other,
disconnect those that have already been paired
from the main power.
FACTORY RESET YOUR DEVICE
For wireless ON/OFF switch:
Press the pairing button 4 times within 5 seconds.

CHANGING THE BATTERY

When the wireless ON/OFF switch is used
regularly and as intended, the battery will last for
approximately 2 years.
When it's time to replace the battery, a red LED
indicator will flash when you toggle the ON/OFF
switch.
Open the rear cover, and replace the battery with a
new CR2032 battery.
4