Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Xenaro – GDP 51..., GDP 6150
40
GRUNDIG Service
PICTURE SETTINGS
Setting the gamma correction
The gamma setting is used to calibrate the colour palette on your screen. You
can use it to adjust the grey colour tones in light and dark scenes. The normal
screen setting has a gamma value of 1.0.
1
Press »i« to call up the main menu.
Gamma correction
0.761 dark
2
Select the »Picture« menu with »
0.815
0.873
select it directly with
0.937
1.000 neutral
1.070
3
Select the » Gamma correction« line with »
1.146
»OK«.
1.227
4
Select the desired value (»0.761 dark« to »1.315 bright«) with »
select
and choose
»
A
« and confirm your selection with »OK«.
5
Press »i« to quit the menu.
Selecting filter functions
1
Press »i« to call up the main menu.
Picture
1 Format
Letterbox
2 Gamma correction
1.000 neutral
2
Select the »Picture« menu with »
3 Extended settings
select directly with
select
exit
3
Select the »Extended settings« line with »
and choose
back
»OK«.
Note:
For further operation, see the following sections, each one starting from
Step 1.
PICTURE SETTINGS
Adapting the colour bandwidth
Chroma filter
Here you adapt the colour bandwidth in order to avoid disturbance or flickering
Off
in the colour reproduction. You can choose between »Off«, »CVBS« and
CVBS
S-Video
»S- Video«. This depends on the video signal.
1
Select the » Chroma filter« line with »
2
Select the desired setting (»CVBS« or »S-VIDEO«) with »
press »OK« to confirm.
select
and choose
Note:
When the »Off« line is selected, the colour filter is switched off.
Selecting the horizontal filter
Horizontal filter
This setting optimises the soft focus function, computer graphics and photos
Crisp
Medium
when playing back a video CD.
Soft
1
Select the » Horizontal filter« line with »
»OK«.
2
Select the desired setting (»Crisp«, »Medium« or »Soft«) with »
and press »OK« to confirm.
select
and choose
Vertical filter
This setting optimises the flicker-reduced reproduction of computer graphics and
Vertical filter
Normal
photographs when playing back a video CD.
Anti-flicker
1
Select the » Vertical filter« line with »
2
Select the desired setting (»Normal« or »Anti-flicker«) with »
and press »OK« to confirm.
3
select
Press »i« to quit the menu.
and choose
____________________________________________________________________
S
« or »
A
« and activate it with »OK«, or
»1 ...
0«.
« or »
« and activate it with
S
A
S
« or »
A
«activate with »OK«, or
»1 ...
0«.
« or »
« and activate with
S
A
____________________________________________________________________
« or »
« and activate with »OK«.
S
A
S
« or »
S
« or »
A
« and activate with
S
« or »
« and activate with »OK«.
S
A
S
Allgemeiner Teil / General Section
« or
S
A
« and
« or »
«
A
« or »
«
A
41
1 - 19
Werbung
Inhaltsverzeichnis
