Blaupunkt EHB608 Bedienungsanleitung Seite 9

EHB608/EHB810
A
Both boards have an automatic balancing function, which can be activated or deactivated by means
of a mobile app. or manually, according to the instructions below
In order to activate the automatic balancing function
1. Turn the device on
2. Set the board horizontally, then gently press and hold the power button for at least 5 seconds
3. When a sound signal is heard, the automatic balancing function is active, and will be activated each
time the board is started.
To deactivate this function, repeat the actions performed while turning it on.
WARNING! When the automatic balancing function is deactivated, it is possible to carry the board.
When the automatic balancing function is activated, the board will go into emergency mode when it
is picked up.
It is recommended to activate the automatic balancing function while learning to ride on the board.
Both models have two riding modes - one for children (the board reacts more gently to body
movements), the other for adults (the board reacts faster to body movements). These modes can be
changed in the mobile app, or manually, according to the instructions below
In order to change the riding mode
1. Turn the device on
2. Set the board vertically (resting the board on one of the wheels), then gently press and hold the
power button for at least 5 seconds
3. When a sound signal is heard, the riding mode "for children" is activated, and will be active each
time the board is started again.
To change the riding mode to the mode "for adults", perform the above actions again.
Follow the instructions below to learn how to drive in practice. Wear comfortable clothing and shoes,
ensure flexibility of the body and relax. Remember to use safety features such as a helmet and suitable
safety equipment when driving. We hope that you will be able to complete this initial stage of driving
training.
Learning to drive
• Step 1. Press the power switch and start the electric hoverboard.
• Step 2. If you are ready to ride, step one foot on the pedal, the sensors will start and activate the
automatic hoverboard balancing function and the indicator lights will light up. Then step your foot
leg on the pedal next to you, while keeping your balance. Stand on the hoverboard and do not make
sudden movements while keeping your body relaxed.
• Step 3. Stand on the hoverboard while maintaining the balance and a proper centre of gravity, as
well as a proper and well-controlled position. The board will remain stationary. By gently tilting the
body forward or backward, you can set the hoverboard in motion: forwards or backwards,
respectively. It is important to remember that the tilt of the body should not be too large and
violent.
• Step 4. Turning. By gently moving your weight to the right foot forwards, you will start turning left,
and by gently moving your weight to the left foot forwards, you will start turning right. (See
following diagram of turning)
• Step 5. Learning how to get off the hoverboard. Stop and keep the electric hoverboard stationary,
and keep your body in balance before stepping off. Jump back from the board with one foot, and as
you stand firmly on the ground, take off your other foot from the hoverboard pedal.
B
7
A
B