Working With The Equipment - Parkside PRMA 40-Li A1 Originalbetriebsanleitung

GB
• The device must never be used
if people – especially children –
or pets are nearby. Children
must never play with the device.
• The operator or user is respon-
sible for any accidents or per-
sonal injury and/or material
damage to third parties or their
property.
• Check the terrain on which the
device will be used and remove
any stones, sticks, wires or
other foreign objects which may
be drawn into the device and
ejected.
• Wear suitable work clothing,
such as solid shoes with non-
slip soles as well as long, robust
trousers. Never use the device
barefooted or wearing open
sandals. Avoid wearing loose
clothing with hanging laces or
belts.
• Before use, always perform
a visual inspection to check
whether the cutting blades,
fastening bolts and the whole
cutting unit are worn out or
damaged. Do not use the de-
vice if its safety equipment (e.g.
impact protection or grass col-
lection box), parts of the cutting
unit or bolts are missing, worn
or damaged. Damaged or
worn cutting blades and fasten-
ing bolts must only be replaced
as a set to prevent imbalance.
• Seien Sie vorsichtig bei Ge
• Take care when using devices
with several cutting tools since
the movement of one blade can
lead to rotation of the other
blades.
8
• Only use spare parts and acces-
sories which are supplied and
recommended by the manufac-
turer. Using externally produced
parts results in the immediate
loss of the warranty claim.
• Worn or damaged information
signs must be replaced.

Working with the Equipment:

Do not place feet or hands
near or under rotating parts
when working. Risk of injury!
• Switch the motor on as directed
and only if your feet are a safe
distance away from the cutting
tools.
• Do not use the device in the
rain, poor weather, damp envi-
ronments or on wet lawn. Only
work in daylight or where there
is sufficient illumination.
• If you are tired or lacking in
concentration or have con-
sumed alcohol or tablets, do not
work with the device. Always
have a break on time. Work us-
ing common sense.
• Always ensure secure position-
ing, particularly on slopes,
when working. Always move
crosswise across slopes, never
up or down. Take special care
when changing the direction of
travel on slopes. Do not work
on overly steep slopes.
• Only operate the device at
walking speed. Take special
care when turning the device
around, pulling it towards you
or going backwards.