Troubleshooting; Cleaning And Maintenance; Storage; Environmental Instructions And Disposal Information - Parkside PSHL 2 B1 Bedienungs- Und Sicherheitshinweise

Troubleshooting / Cleaning and ... / Storage / Environmental instructions ...
z Troubleshooting
Error
The filter does not darken in a
normal way or flickers.
The reaction is slow.
The visibility is poor.
The welding helmet slips.
z Cleaning and Maintenance
Do not use any harsh cleaning agents to
„ z
clean the helmet casing
Never bring the UV filter
„ z
with water.
Clean the product with a soft and dry or
„ z
moistened cloth or clean it with a cloth
moistened with disinfectant.
z Storage
Keep the device in a dry place and out
„ z
of the reach of children.
During storage, make sure the LED light
„ z
14
switch is switched off [left position
"OFF"].
14 GB/CY
Cause
The protector does not darken in a
normal way or flickers.
The arc sensor is not clear.
The welding current is
too low.
The ambient temperature is too
low / high.
The sensitivity is too low.
The protector / the protective
screen is dirty.
The protective film on the protec-
tive screen was not removed.
The ambient light is not sufficient.
The wrong darkening shade has
been set.
The headband 5 has been put
on incorrectly.
z Environmental instructions
.
2
into contact
8
The device, accessories and packaging
should be recycled in an environmentally
friendly manner.
Do not throw the auto-darkening welding hel-
met into household rubbish, fire or water. If
possible, non-operational equipment should
be recycled. Contact your local retailer for
information.
Clean the protector or replace it.
Clean the arc sensor's surface.
Set the sensitivity to the
maximum degree.
Only use the welding
helmet in temperatures
between -5 °C and +55 °C.
Set the sensitivity to a
higher setting.
Clean the protector and the
protective screen.
Remove the protective film.
Apply more light to your work
surroundings.
Reset the darkening shade.
Put on the headband 5 again
tighter.
and disposal information
Don't waste, recycle!
As the consumer you are legally
obliged (by the German Battery
Solution