Parkside PSHL 2 B1 Bedienungs- Und Sicherheitshinweise Seite 58

Safety instructions
experience and / or knowl-
edge, so long as they are su-
pervised or instructed in the
safe use of the device and un-
derstand the associated risks.
Do not allow children to play
with the product. Cleaning
and user main tenance should
not be performed by children
without supervision.
The welding helmet with auto-
„ „
matic darkening is not suitable
for laser and gas welding.
Never place the welding
„ „
helmet on hot surfaces.
Never open the welding
„ „
helmet. Never carry out re-
pairs on or modifications to
the welding helmet. These may
only be carried out by trained
experts.
Please ensure that you have
„ „
set the automatic darkening
before each welding proce-
dure.
The safety visor should not be
„ „
opened. It protects the filter
from dirt and damage.
If the filter does not automati-
„ „
cally darken, then immediate-
ly end the welding procedure
and contact the manufacturer.
Only use the welding helmet
„ „
in temperatures between -5 °C
and +55 °C. The filter's reac-
tion time will slow down if this
58 GB/MT
temperature has not been
reached or is exceeded.
Clean the filter, the surface of
„ „
the helmet and the solar cells
regularly.
Replace the protective visor if
„ „
scratches or damages appear.
The welding helmet does not
„ „
provide protection against im-
pact.
Frequent use, cleaning or stor-
„ „
age can mean that the service
life is less than 6 years. Re-
place the welding helmet im-
mediately if the viewing panel
gets scratched or the viewing
panel is visibly damaged in
any other way.
ATTENTION! Materials
that come into contact with the
wearer's skin may cause allergic
reactions in people with sensitive
skin.
ATTENTION! Eye protection
can represent a hazard for the
wearer if it is worn over normal
corrective glasses due to the im-
pact from high-speed particles.
ATTENTION! If protection
against high-speed particles at
extreme temperatures is required,
the eye protection chosen must
be labelled with the letter T direct-