Herunterladen Inhalt Inhalt Diese Seite drucken

Advice On Working With Materials / Tools / Speed Ranges; Tips And Tricks - Parkside PMGS 12 B2 Bedienungs- Und Sicherheitshinweise

Modellbau- und gravierset
Vorschau ausblenden Andere Handbücher für PMGS 12 B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 57
operation
Connect the device to the power supply by
inserting the mains plug into the socket.
Press down the oN / oFF switch
move it in direction of the rotational speed con-
trol
. Then set the rotational speed control to
1
a position between "5" and "20".
Switching off:
Set the rotational speed control
"5". Press down the oN / oFF switch
then move it in direction of the cable.
Advice on working with
Q
materials / Tools / Speed ranges
Use the highest speed when working on steel
or iron with the milling bits
Use a short trial on a test piece to determine the
optimum rotational speed range for working on
zinc, zinc alloy, aluminium, copper and lead.
Use the low speed range for working on plastics
and low-melting point materials.
Use high speeds on wood.
Use the medium speed range for cleaning,
polishing and buffing.
The following information shall be considered as
recommendatory only. Learn by practical experience
which tools and settings are the best for the materi-
als you work with.
Setting the appropriate speed:
numeral on the
Material to be
rotational speed
worked on
control
1
5
8
12
16
20
54 GB/MT
and then
2
to position
1
and
2
.
20
Plastics and low melting
point materials
Stone, Ceramics
Softwood, metal
Hardwood
Steel
Examples of appropriate tool selection
Function:
Function
Accessory
Drilling
HSS drill
Milling
Milling bits
20
Engraving
Engraving
bits
21
Polishing,
Metal brush
derusting
16
Polishing
wheel
14
CAUTIOn!
Use only the
lightest con-
tact pressure
of the tool on
the work-
piece.
Cleaning
Plastic brush
19
Grinding
Grinding
wheels
grinding bits
22
Cutting and
Cutting discs
sawing
17

Tips and tricks

Q
If you use press too hard you run the risk of break-
ing the tool or damaging the workpiece. You will
achieve the best results by operating the tool at a
constant rotational speed and using a low contact
pressure on the workpiece.
Application
Drilling wood
12
Various tasks, e.g.
hollowing out,
gouging, shaping,
grooving or slotting
Making marks,
craft projects
(see Fig. D)
Derusting
Working on vari-
ous metals and
plastics, in particu-
lar noble metals
like gold or silver
(see Fig. E)
E.g. cleaning com-
plex plastic hous-
ings or the area
around a door lock
Grinding work on
,
stone, wood; fine
15
work on hard mate-
rials such as ceramic
or alloyed steel
(see Figs. F, G)
Cutting metal,
plastic or wood

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis