Trouble shooting
Problem
Device does not start
Low or lack of suction
Replacement parts
You can order replacement parts directly via our Service Centre (see addresses
page 57). Please state the appliance type when placing an order.
Item Description ........................................................................... Product No.
13
Pleated filter .............................................................................. 91099216
14
Wire filter basket........................................................................ 91099217
12
Suction tube .............................................................................. 91099242
11
Metal suction hose .................................................................... 91099243
Possible cause
Mains voltage is not
present
The equipment is not
switched on
Safety stop due to missing
or incorrectly inserted
pleated filter (
13)
Defective on/off switch
(
6)
Defective motor
Suction hose (
or suction tube (
blocked
The metal container (
is not closed
The metal container (
is full
The pleated filter (
clogged
The air filter (
17) is
clogged
Fault correction
Check plug socket, cable,
line, plug and fuse, where
appropriate, repair through
electrical specialist
Switch on the equipment (see
"switching on/off")
Insert the pleated filter correctly
(see "cleaning/maintenance")
Repair through customer
service
11)
Remove obstructions and
12)
blockages
10)
Close the metal container
Empty the metal container (see
10)
"cleaning/maintenance")
Clean or replace the
13) is
pleated filter (see "cleaning/
maintenance")
Clean the air filter (see
"cleaning/maintenance")
GB
CY
11