Included Items; Technical Details - Parkside PGG 15 A1 Bedienungs- Und Sicherheitshinweise

Introduction

Included items

1 Power engraving tool PGG 15 A1
2 Engraving stencils
1 Operating instructions

Technical details

Rated voltage:
Mode of operation:
Rated current:
Stroke rate:
Noise and vibration data:
Measured values for noise are determined in accordance with
EN 60745. The A-weighted noise level of the electrical power tool
are typically:
Sound pressure level: 74.4 dB(A)
Sound power level:
Uncertainty K:
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration: 1.582 m / s
Uncertainty K = 1.5 m / s
been measured in accordance with a standardised measurement pro-
cedure specified in EN 60745 and can be used to compare devices.
8 GB
230 V∼ 50 Hz
intermittent operation: S3 20 %
0.15 A
6000 min
-1
85.4 dB(A)
3 dB
2
2
The vibration level given in these instructions has