Cleaning; Troubleshooting - Parkside PEK 2.7 C2 Montage-, Bedienungs- Und Sicherheitshinweise

Store the product in a dry indoor location protected from direct
sunlight, preferably in its original packaging .
˜ Cleaning
Before cleaning: Switch the product off . Remove all plugs .
No acid, chafing or solvent cleaning agents should be used or the
product can be damaged .
Clean the housing of the product using a soft, dry cloth only!
At persistent soiling, a mild cleaning agent can be used .
˜ Troubleshooting
Problem
The product does not
work .
The product displays
no picture or the
picture is displayed
weak .
The picture
transmission to the
computer does not
function correctly .
Possible causes
The batteries are not
properly inserted .
The batteries' voltage
may be low .
The LED brightness
level is too low .
Connection incorrect .
Solution
Remove the batteries .
Re-insert the
batteries with correct
polarities .
Insert new batteries .
Re-start the product .
Increase the LED
brightness level .
Check the connection
between the product
and the computer .
GB 19