Herunterladen Inhalt Inhalt Diese Seite drucken

Chain Saw Safety Warnings - Parkside PKS 2200 A1 Originalbetriebsanleitung

Elektro-kettensäge
Vorschau ausblenden Andere Handbücher für PKS 2200 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 109
GB
MT
the irm grip on the chainsaw handles.
Ensure that the saw chain does not
come into contact with the ground.
After completing the cut, wait for the
chainsaw to come to a standstill before
removing the chainsaw. Always switch
off the chainsaw motor before moving
from one tree to another.
Dirt, stones, loose bark, nails, staples
and wire must be removed from the tree.
Service
Have your power tool serviced
by a qualiied repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Follow the maintenance, control and ser-
vice instructions in this manual carefully.
Damaged safety equipment and parts
must be repaired or replaced profes-
sionally by our service centre, unless
otherwise indicated in the operating
instructions.

Chain saw safety warnings:

Keep all parts of the body
away from the saw chain when
the chain saw is operating. Be-
fore you start the chain saw,
make sure the saw chain is not
contacting anything. A moment of
inattention white operating chain saws
may cause entanglement of your cloth-
ing or body with the saw chain.
Always hold the chain saw with
your right hand on the rear
handle and your left hand on
the front handle. Holding the chain
saw with a reversed hand conigura-
tion increases the risk of personal in-
jury and should never be done.
92
Hold the power tool only on the
insulated handle surfaces, as the
saw chain may come into contact
with concealed power cables.
Contact between the saw chain and a
live cable may render metallic compo-
nents live and result in an electric shock
Wear safety glasses and ear
protection. Other protective
equipment for the head, hands,
legs and feet is compulsory. Ad-
equate protective clothing will reduce
personal injury by lying debris or ac-
cidentaI contact with the saw chain.
Do not operate a chain saw in a
tree. Operation of a chain saw white up
in a tree may result in personal in jury.
Always keep proper footing
and operate the chain saw only
when standing on ixed, secure
and level surface. Slippery or un-
stable surfaces such as ladders may
cause a loss of balance or control of
the chain saw.
When cutting a branch that is
under tension be alert for spring
back. When the tension in the wood
ibres is released the spring loaded Iimb
may strike the operator and/or throw
the chain saw out of control.
Use extreme caution when cut-
ting brush and saplings. The slen-
der material may catch the saw chain
and be whipped toward you or pull
you off balance.
Carry the chain saw by the
front handle with the chain saw
switched off and away from
your body. When transporting
or storing the chain saw always
it the guide bar cover. Proper
handling of the chain saw will reduce
the Iikelihood of accidentaI contact
with the moving saw chain.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis