General description
See the fold-out pages for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
-
Device
-
Protective hood
-
2 cutting disks (pre-mounted)
-
Vacuum adapter
-
Reducing adapter for vacuum
-
Chuck key
-
Hand chisel
-
Storage case
-
Instructions for use
Functional description
The wall chaser cuts two grooves in brick-
work using two parallel diamond cutting
disks, without requiring the use of water.
Cabling grooves can be opened up by
removing the material in between the
grooves.
Please refer to the information from the
disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Handgrip
2 On/off switch
3 Switch block
4
Auxiliary handle
5 Maintenance coverage
6
Marking
7 Spindle stop button
(pre-mounted)
8 Cutting disc
9
Start roller
10
Vacuum connector
11
Vacuum adapter
12
Hand chisel
13 Chuck key
14
Rotational direction marking
15
Protective guard opening
16 Mounting spindle
Threaded clamping lange
17
18
Retaining screw
19 Mounting lange
20
Spacer disks
21
Flange
Technical data
Wall chaser
.............PMNF 1350 D4
Rated input voltage ..........230 V~, 50 Hz
Power input .............................. 1350 W
Idling speed (n) .......................9000 min
Dimension of the cutting discs
............................... Ø
Groove depth
......................... 0 - 30 mm
Groove width
................ 8 mm bis 26 mm
Spindle thread ................................ M14
Safety class ..........
Protection category..........................IP X0
Sound pressure level
(L
) ...................... 94 dB(A); K
pA
Sound power level
measured ........... 105 dB(A);
Vibration (a
) ......... 7,5 m/s
h
The vibration values represent maximum
values which have been determined with the
supplied blade. The actual vibration values
may vary depending on the used acces-
sories.
The vibration values are still affected by the
handling for the user's.
GB
125 x 22,23 mm
II (Double insulation)
= 3 dB
pA
(L
)
WA
K
= 3 dB
WA
; K= 1,5 m/s
2
MT
-1
2
23