Safety Notes; Symbol Description; Installation Instructions; Technical Data - HANSGROHE 10822000 Gebrauchsanleitung, Montageanleitung

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal pres-
sures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
• As a standard, the mixer is supplied with a C aerator.
If the water jet tends to splash when hitting the sink,
exchange the C aerator for the aerator (comprised in
the delivery) which has a lower flow rate.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Thermal disinfection:
The product is exclusively designed for drinking water!
4
English
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max. 70°C
65°C
max. 70°C / 4 min
Assembly see page 31

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 35)

Flow diagram

(see page 35)

C-aerator

aerator 8 l/min
Operation (see page 36)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Cleaning (see page 38) and en-
closed brochure
Spare parts(see page 37)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Test certificate (see page 40)