Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5.2 Adjusting the reception group
and the transmission channel
1) Keep the key
(6) pressed for 2 s until the indica-
tion FREQ (b) starts flashing. Then shortly press
the key
once again so that the indication
"GROUP" (c) and the letter "G" of the group indica-
tion (j) start flashing.
Note: To exit the adjusting mode without making an
adjustment, press the key
the display shows
return to normal operation.
2) Use the cursor keys
reception group ( , ,
groups will be scanned in descending order; with
L
the key
, they will be scanned in ascending order.
The corresponding channels and transmission fre-
quencies can be found in the table in fig. 4.
3) Confirm the input with the key
"GROUP" (c) and "CH" (k) will start flashing.
4) Use the cursor keys to adjust the transmission
channel (1 – 16): With the key
be scanned in descending order; with the key
they will be scanned in ascending order.
5) To memorize the adjustments for the reception
groups and the transmission channel, press the
key
. The display will shortly show
adjusting mode will be exited, and the unit will go to
normal operation.
Group
A
Channel
1
744.250
2
745.500
3
746.500
4
747.125
5
748.250
6
749.125
7
750.500
8
753.500
9
754.250
10
755.875
11
757.000
12
758.500
13
759.000
14
760.750
15
761.750
16
763.250
Fig. 4 Received frequencies in MHz of the groups and channels
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
so many times until
. The unit will then
M
L
(4) and
(5) to adjust the
or ): With the key
. On the display,
M
, the channels will
B
C
740.750
741.125
740.625
741.375
741.750
741.125
743.125
742.625
741.875
744.000
743.750
743.625
745.250
744.500
745.875
746.250
746.125
747.125
746.875
746.875
747.875
748.000
748.250
749.125
748.875
749.000
750.875
750.250
750.875
751.375
753.250
754.500
752.875
754.000
755.875
753.375
755.625
756.625
754.125
756.750
757.750
756.250
758.250
758.375
757.625
763.750
763.750
763.625
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
5.3 Locking function
With the locking function activated, it is no longer pos-
sible to switch off the receiver and to call the mode for
frequency adjustment or group/channel adjustment. If
this is tried, the indication "LOCK" (a) starts flashing on
the display.
5.3.1 Activating the locking function
1) Keep the key
tion FREQ (b) starts flashing. Then shortly press
the key
"LOCK" (d) starts flashing and
on the display.
M
, the
2) Switch to
3) Confirm the activation with the key
will shortly indicate
be exited, and the unit will change to normal oper -
ation. As a reminder of the activated key lock,
"LOCK" (a) will be indicated.
5.3.2 Deactivating the locking function
1) Keep the key
L
,
switches to
2) Deactivate the key lock with the key
play will switch to
3) Terminate the unlocking process with the key
, the
The display will shortly indicate
mode will be exited, and the unit will change to nor-
mal operation.
D
6 Specifications
Type of unit: . . . . . . . . . PLL multifrequency receiver
Radio frequency range: . 740 – 764 MHz
Frequency stability: . . . . ±0.005 %
Audio frequency range: . 40 – 18 000 Hz
THD: . . . . . . . . . . . . . . . < 0.6 %
Dynamic range: . . . . . . . > 105 dB
Noise suppression: . . . . pilot tone squelch,
Audio outputs
XLR, bal.: . . . . . . . . . 100 mV/ 150 Ω
6.3 mm jack, unbal.: . 500 mV/ 1 kΩ
Ambient temperature: . . 0 – 40 °C
Power supply: . . . . . . . . via the power supply unit
Dimensions
(w / o antennas): . . . . . . 211 × 40 × 137 mm
Weight: . . . . . . . . . . . . . 1 kg
Subject to technical modification.
®
(6) pressed for 2 s until the indica-
three times again so that the indication
L
with the key
(5).
, the adjusting mode will
(6) pressed for 3 s until the display
and "LOCK" (d) starts flashing.
.
with true diversity technique
noise mute
supplied connected to
230 V~ / 50 Hz
is indicated
. The display
M
(4). The dis-
.
, the adjusting
11
Werbung
Inhaltsverzeichnis
