General Safety Instructions For Power Tools - Parkside PKGA 12 A Originalbetriebsanleitung

Danger due to materials blown out
of machine!
Remove persons in the vicinity from
the danger area.
Guaranteed sound power level
Electrical devices must not be dispo-
sed of with domestic waste.
Graphical symbols on the spray
attachment:
Empty the spray attachment prior to
storage.
Do not spray people or animals.
Do not use any flammable liquids.
Store the device out of reach of
children.
Do not inhale the vapours!
Opening/closing the tank cover
Spray attachment nozzle regulation
MAX
2/3 Level indicator
1/3
MIN
General safety instructions
for power tools
WARNING! Read all safety direc-
tions and instructions. Omissions
in the compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
GB
Retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fied plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with
earthed or grounded surfaces,
such as pipes, radiators, ranges
and refrigerators. There is an
increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never
use the cord for carrying, pulling
or unplugging the power tool.
IE NI CY
7