Husqvarna 115iHD45 Bedienungsanweisung Seite 12

Maintenance
Clean the external parts of the product.
Examine that the start and stop switch works correctly and is not damaged.
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
Make sure that all controls work and are not damaged.
Make sure that the cutter blade and cutter guard have no cracks and that they
are not damaged. Replace the cutter blade or the cutter guard if they have
cracks or if they have been exposed to impact.
Replace the cutter blade if it is bent or damaged.
Make sure that the hand guard is not damaged. Replace the guard if it is dam-
aged.
Make sure that the screws and nuts are tight.
Make sure that the battery is not damaged.
Make sure that the battery is charged.
Make sure that the battery charger is not damaged.
Make sure that the screws that hold the cutter blades together are correctly tight-
ened.
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
To examine the cutter blade
1. Clean the cutter blades from unwanted materials
with an anti corrosion cleaning agent before and
after you use the product.
12
2. Examine the edges of the cutter blade for damages
and deformation.
3. Use a file to remove burrs on the cutter blade.
4. Make sure that the cutter blades move freely.
To clean and lubricate the blades
1. Clean the blades from unwanted materials before
and after you use the product.
2. Lubricate the blades before long periods of storage.
Note: Speak to your servicing dealer for more
information about recommended cleaning agents and
lubricants.
To lubricate the gear
Apply grease to the gear housing if the gear has been
disassembled by an approved servicing dealer.
• Use Husqvarna special grease. Speak to your
servicing dealer for more information about
recommended grease.
• Only use a small quantity of a special high quality
grease.
Before
Weekly Monthly
use
X
X
X
X
X
X
X
X
X
X
X
X
779 - 001 - 08.07.2019
X