Maintenance; Repair; Storage; Transportation - Parkside PFMR 1600 A1 Bedienungs- Und Sicherheitshinweise

Dry the universal stirrer 4 after cleaning and
spray a little anti-rust oil onto them before

storage .

NOTE
Do not use chemical, alkaline, abrasive or
u
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces .
˜ Maintenance
Before and after each use, check the product
and accessories (or attachments) for wear and
damage . If required, exchange them for new ones
as described in this instruction manual . Observe
the technical requirements (see "Technical data") .
˜ Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .
˜ Storage
Switch the product off and disconnect it from
the mains .
Clean the product as described above .
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place .
Always store the product in a place that is
inaccessible to children . The ideal storage
temperature is between 10 °C and 30 °C .
We recommend using the original package
for storage or covering the product with a
suitable cloth or enclosure to protect it against
dust .
28 GB/IE
˜ Transportation
Switch the product off and disconnect it from
the mains .
Attach transportation guards, if applicable .
Always carry the product by its gripping
surface .
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles .
Secure the product to prevent it from slipping
or falling over .
˜ Troubleshooting
m
WARNING!
Only perform the steps described within
u
these instructions! All further inspection,
maintenance and repair work must be
performed by an authorised service centre
or a similarly qualified specialist if you
cannot solve the problem yourself!
Suspected malfunctions are often due to causes
that the users can fix themselves . Therefore check
the product using this section . In most cases the
problem can be solved quickly .
Problem Possible
cause
Product does Not connected
not start to power
supply
Power cord
or plug is
defective
Other electrical
defect to the
product
Solution
Connect to
power supply
Check by
a specialist
electrician
Check by
a specialist
electrician