Herunterladen Inhalt Inhalt Diese Seite drucken

Before Use; Fitting The Universal Stirrer; Removing The Universal Stirrer; Operation - Parkside PFMR 1600 A1 Bedienungs- Und Sicherheitshinweise

Farb- und mörtelrühre
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer .
NOTE
This instruction manual contains information
u
and suggestions for several attachments
and their uses . The attachments depicted
are not necessarily included in the
shipment, but are meant to indicate
additional possibilities for using this
product .
˜ Before use
m
WARNING!
Risk of accident if the machine is operated
u
using electrical power supply that does
not match the specifications shown on the
rating label of the tool .
The mains voltage and the frequency of
u
the power source must correspond with the
specifications on the machine's rating plate .
m
WARNING!
Always switch the product off and
disconnect it from the mains before
performing inspections, installing
accessories or making adjustments!
˜ Fitting the universal stirrer
Screw the shaft 4b into the spiral 4a
 
completely (Fig . B) .
Then screw the assembled universal stirrer 4
 
into the agitator shaft 3 completely (Fig . C) .
Tighten the universal stirrer 4 firmly by using
 
assembly spanners 2 per rotational direction
(Fig . D) .
26 GB/IE
˜ Removing the universal stirrer
Removing the universal stirrer 4 from the
 
agitator shaft 3 : Use the assembly spanners
2 per rotational direction of
reverse steps of "Fitting the universal stirrer"
mentioned above) .
˜ Operation
˜ Switching on/off (see fig. E)
Switching on:
Press the ON/OFF switch 5 and hold it in
 
position .
Switching off:
Release the ON/OFF switch 5 .
 
˜ Switching to continuous

operation

Press the ON/OFF switch 5 , lock the ON/
 
OFF switch 5 with the locking button 6 ,
then release the ON/OFF switch 5 .
˜ Switching off continuous
operation
Press the ON/OFF switch 5 briefly .
 
˜ Soft-start function
This product has electronically controlled
 
soft start function which enables the product
starting up smoothly to avoid "kick-back" . This
function enhances safety and also prevents
the materials to be mixed from spurting out of
the mixing container .
(follow the

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis