Connecting The Sawdust Extraction Appliance; Operation; Switching On And Off; Setting The Cutting Angle - Parkside PHKS 1350 C2 Originalbetriebsanleitung

Connecting the sawdust extraction
appliance
♦ Attach the adapter for dust extraction
chip ejector .
♦ Connect an approved dust and chip extraction
device.

Operation

Switching on and off
Switching on:
♦ Push the safety lock-out
and keep it pressed.
♦ Press the ON/OFF switch
running you can release the safety lock-out
Switching off:
♦ Release the ON/OFF switch

Setting the cutting angle

You can select the cutting angle with the help of the
cutting angle scale .
■ Release the wing screw on the cutting angle
preselector , set the desired angle on the
cutting angle scale
wing screw.

Setting the cutting depth

NOTE
► We generally recommend setting the cutting
depth to approx. 3 mm more than the thickness
of the material. This ensures that you achieve
a clean cut.
♦ Release the locking screw
cutting depth on the cutting depth scale
then re-tighten the locking screw

Working with the circular saw

1. Switch on the device – as described in "Switching
on and off" – and then place it with the front
edge of the base plate
2. Align the machine using the guide fence
by using a marked line.
3. Hold the machine in both hands using the
handles and saw by exerting an even pressure.
PHKS 1350 C2
to the
to the left or right
. Once the saw is
.
and then re-tighten the
, set the desired
and
.
on the material.
or
Switching the laser on and off
Switching on:
♦ Press the ON/OFF switch laser
Switching off:
♦ Press the ON/OFF switch laser
NOTE
► If the batteries are spent, replace them with
two new 1.5 V alkaline button cells (type
AG 13/LR 44, e.g. GPA 76) .

Set rotational speed

.
■ Turn the adjusting wheel
rotational speed (arrow marking ▲)
(1 = lowest rotational speed/6 = highest rota-
tional speed):
Use the following suggested settings or set the rota-
tional speed on the adjusting wheel
Material
Cross cuts & longitudinal cuts in
hard and soft wood (solid wood)
Chipboard, fibre board
Core board, plywood
Coated and veneered boards
PVC sheets
Acrylic glass sheets, perspex
Aluminium plate
Aluminium profile
Plaster board
Stone wool board
Cement-bonded particle board
.
.
to the desired
as required.
Rotational
speed
setting
6
6
6
6
3–5
2-4
4-6
4-6
1-2
1-2
1-2
GB │ IE │
23 ■