Noise Hazards; Hazard Due To Vibration - Parkside PDSS 400 A1 Bedienungs- Und Sicherheitshinweise

Safety instructions for air tools
being blown about in a dusty
environment is minimised.
If dust or vapours are gener-
„ „
ated the principal task must
be to monitor them in the area
where they are released.
All machine mounting parts or
„ „
accessories intended to collect,
extract or eliminate airborne
dust or vapours should be used
and maintained according to
manufacturer instructions.
Use respiratory protection.
„ „
Please use suitable respira-
„ „
tory protective equipment due
to the potential hazard posed
by the whirling up of asbestos
dust.
z Noise hazards
With inadequate ear protec-
„ „
tors the impact of high noise
levels may result in permanent
hearing damage, hearing loss
and other problems, e.g. tinni-
tus (ringing, whistling or buzz-
ing in the ear).
It's imperative to perform a risk
„ „
assessment for these hazards
and implement the suitable
regulatory mechanisms.
Suitable regulatory mecha-
„ „
nisms to minimise the risk in-
clude measures such as using
insulation to prevent pinging
36 GB/IE
sounds on work pieces.
Use hearing protection.
„ „
The machine for screw con-
„ „
nections must be operated and
maintained as recommended
in these instructions to prevent
an unnecessary increase in the
noise level.
If the machine for screw con-
„ „
nections features a silencer,
always ensure it is availa-
ble when using the machine
for screw connections and in
good working order.
Select, maintain and replace
„ „
consumables and machine
tools as recommended in
these instructions to prevent an
unnecessary increase in the
sound level.
z Hazard due to vibration
Exposure to vibration may
„ „
cause damage to the nerves
and disturb blood circulation
in hands and arms.
Keeps hands away from the
„ „
sockets of hex nut drivers.
Wear warm clothes when
„ „
working in cold environments
and keep hands warm and
dry.
If you notice your skin on
„ „
fingers or hands becoming
numb, tingling, hurting or be-