Risks Due To Projecting Parts; Risks From Gripping / Winding - Parkside PDSS 400 A1 Bedienungs- Und Sicherheitshinweise

lery. Keep your hair, clothing
and gloves away from moving
parts. Loose clothing, jewel-
lery or long hair can become
caught in moving parts.
Put down trigger and equip-
„ „
ment in the event of unex-
pected compressor failure.
Never use or store the tool in
„ „
humid, dusty locations or near
water, other fluids or hazard-
ous gases.
If possible, use a condensate
„ „
trap or regularly drain conden-
sate (water) from hoses and
pipes before and during air
tool use.
Secure work pieces. Use
„ „
clamps or a vice to secure the
work piece. Holding the work
piece in your hand or pressing
it against your body will not
allow for safe use of the equip-
ment.
ATTENTION! An under-
„ „
sized com- pressed air
system may reduce the
efficiency of your equip-
ment.
z Risks due to projecting
parts
If the work piece, one of the
„ „
accessories or the tool itself
breaks, parts may be pro-
Safety instructions for air tools
jected at great speeds.
Always wear impact-resistant
„ „
eye protection when using the
machine for screw connec-
tions. The level of protection
required should be asses for
each individual application.
Be sure the work piece is prop-
„ „
erly secured.
z Risks from gripping /
winding
Risks from gripping / wind-
„ „
ing may result in suffocation,
scalping and / or cuts if loose
clothing, jewellery, necklaces,
hair or gloves are not kept
away from the machine and its
accessories.
Gloves may become tangled
„ „
in the rotating drive, which
may result in injuries or frac-
tures in fingers.
Rotating drives and extensions
„ „
may easily catch/ wind rub-
berised or metal reinforced
gloves.
Never wear loose gloves or
„ „
gloves with cut or worn fin-
gers.
Never hold on to the drive,
„ „
collect or the drive extension.
Keep hands away from the ro-
„ „
tating drive.
GB/IE 33