Connections To Märklin Digital; Technical Data; Overload Protection - Märklin 60061 Bedienungsanleitung

2. Connections to Märklin Digital
This switched mode power pack may be connected only to
the 60213, 60214 Central Stations or to the 60173 and 60174
Boosters.
Connections: See the instructions for use for the unit in
question or see page 19.

3. Technical Data

See the specifications plate on the power pack.

4. Overload Protection

A overload protection protects the power pack in the event
of an overload or a short circuit. The locomotives will come
to a stop, solenoid accessories cannot be controlled, and all
lamps/lights connected to the layout will go out.
The following procedure is recommended:
Look for the cause and correct it; after that the switched
mode power pack will automatically turn itself back on.
General Notes
The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
6