Use And Handling Of The Cordless Electrical Power Tool; Service; Appliance-Specific Safety Instructions For Hammer Drills - Parkside PSBSA 20-Li A1 Originalbetriebsanleitung

f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits,
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5. Use and handling of the cordless
electrical power tool
a) Charge a rechargeable battery unit using only
the charger recommended by the manufactur-
er. Chargers are often designed for a particular
type of rechargeable battery unit. There is the
danger of fire if other types of rechargeable
battery units are used.
b) Only the rechargeable battery units supplied
are to be used with an electrical power tool.
The use of other rechargeable battery units may
lead to the danger of injury or fire.
c) When they are not being used, store re-
chargeable battery units away from paper-
clips, coins, keys, nails, screws or other small
metal objects that could cause the contacts
to be bridged. Short-circuiting the contacts of
a rechargeable battery unit may result in heat
damage or fire.
d) Fluids may leak out of rechargeable battery
units if they are misused. If this happens,
avoid contact with the fluid. If contact occurs,
flush the affected area with water. Seek addi-
tional medical help if any of the fluid gets into
your eyes. Escaping battery fluid may cause
skin irritation or burns.
PSBSA 20-Li A1
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
Protect the rechargeable battery from
heat, for example from continuous
exposure to sunlight, fire, water and
moisture. There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
Appliance-specific safety instructions
for hammer drills
■ Wear hearing protection. Exposure to loud
noise can lead to hearing loss.
■ Use the additional handle supplied with the
appliance. Loss of control of the machine can
lead to injuries.
■ Hold the power tool by the insulated gripping
surfaces when performing an operation in
which the screw or attached tool could come
into contact with hidden wiring. Contact
between the screw or attached tool and a live
wire may cause exposed metal parts of the
power tool to become live and give the opera-
tor an electric shock.
GB │
IE│ 17■