Safety Instructions; Symbols And Icons; Symbols In The Manual - Parkside PUB 500 A1 Originalbetriebsanleitung

Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at
protecting the user should be
based on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).

Safety instructions

CAUTION! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of
injury and i re.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.

Symbols and icons

Symbols on the device
Caution!
Read the operating
instructions.
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger
area.
Wear ear and eye
protection!
Warning!
Risk of injury from the rotat-
ing tool! Keep hands and
feet away.
Do not expose the device
to the damp.
Caution! Disconnect the
plug before cleaning and
repair work and if the
power cable is damaged.
Wear gloves!
Noise level specii cation
L in dB
WA
Electrical appliances must
not be disposed of with the
domestic waste.
Protection class II
Direction of travel of brush
Push
Operation, brush support
Pull

Symbols in the manual

Warning symbols with
information on damage
and injury prevention.
Hazard symbol with
information on the
prevention of personal
injury caused by electric
shock.
Instruction symbols with
information on preventing
damage.
GB IE
19