Herunterladen Inhalt Inhalt Diese Seite drucken

Extent Of The Delivery; Functional Description; Survey; Technical Data - Parkside PUB 500 A1 Originalbetriebsanleitung

Universalbuerste
Vorschau ausblenden Andere Handbücher für PUB 500 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
IE

Extent of the delivery

Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- Additional handle
with spare brush storage
- 1 x large plastic brush
- 1 x metal brush
- 1 x nylon brush
- Hexagon socket wrench
- Instruction Manual

Functional description

The hand-operated joint brush is equipped
with an electric motor.
Depending on the application require-
ments, there are three different brushes
which can be used for cleaning joints and
surfaces.
The telescopic arm enables comfortable
operation in an upright posture.
Please refer to the descriptions below for
information about the operating devices.

Survey

1 Handle
2 On/off switch
3 Mains cable
4 Switch lock
5 Strain relief
6 Handle screw, additional handle
7 Screw socket for length
adjustment, handle
8 Telescopic arm
9 Splash guard
10 Large plastic brush
11 Guiding roller
12 Motor head
13 Additional handle
18
14 Speed regulator
15 Brush support
(metal brush/nylon brush)
16 Hexagon socket wrench
17 Narrow metal brush
18 Narrow nylon brush
19 Working position
20 Transport position
21 Retaining tab, guiding roller

Technical data

Electric multi-purpose brush ... PUB 500 A1
Motor voltage ........... 230-240 V~, 50 Hz
Power P ..................................... 500 W
Protection class .................................
Protection category...........................IPX0
Idling speed n
..............600-1200 min
max
Weight (without. accessories) ........ 3.6 kg
Sound pressure level
(L
) ................... 81.5dB(A); K
pA
Sound power level (L
measured ..... 93.9 dB(A); K
guaranteed ........................... 96 dB(A)
Vibration (a
)
h
additional
handle ............3,542 m/s
handle ............ 2,421 m/s
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
= 3 dB
pA
)
WA
= 2.04 dB
WA
2
; K= 1,5 m/s
2
; K= 1,5 m/s
II
-1
2
2

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis