Hazards Caused By Flying Parts; Hazards During Operation - Parkside PDBNP 14 A1 Originalbetriebsanleitung

■ The rivet gun should only be adjusted, set or used by adequately
qualified and trained operators.
■ This rivet gun may not be modified. Modifications can reduce the
effectiveness of the safety measures and increase the risks for the
operator.
■ The safety instructions should not be lost – give them to the operator.
■ Never use a damaged rivet gun.
■ The appliance must be inspected regularly to ensure that it is
labelled with the required rated values and markings given in this
manual. The user must contact the manufacturer to obtain replace-
ment labels if necessary.
Hazards caused by flying parts
■ If a workpiece or accessory breaks, parts can be flung out at high
speeds.
■ Always wear impact-resistant eye protection when operating the
rivet gun or exchanging accessories on the appliance. The degree
of necessary protection must be evaluated separately for each
individual task.
■ Wear a safety helmet if working above head height. In this case,
the risks for others should also be assessed.

Hazards during operation

■ When using the machine, the operator's hands can be subject to
hazards such as cuts, grazing and heat. Wear suitable gloves to
protect your hands.
■ The operator and maintenance personnel must be physically capa-
ble of handling the size, mass and power of the machine.
■ Hold the machine correctly: be ready to counteract any normal or
sudden movements - have both hands ready.
■ Ensure that your body is balanced and that you have a secure
standing position.
│ GB │ IE
■ 30
PDBNP 14 A1