General Safety Instructions For Compressed Air Tools - Parkside PDBNP 14 A1 Originalbetriebsanleitung

Wear hearing protection!
Total vibration value:
Vibration values determined in accordance with ISO 28927-6 and
EN 12096:
Vibration emission value a
Uncertainty K = 0.59 m/s
h
NOTE
► The noise emission levels and vibration values specified in these
instructions have been measured in accordance with the corre-
sponding standardised measuring procedure and can be used
to make equipment comparisons. The noise emission levels and
vibration values vary depending on the use of the compressed
air tool and may be higher than the values specified in these
instructions in some cases. It is easy to underestimate the noise
emission levels and vibration values if the compressed air tool is
used regularly in this manner.
WARNING! General safety instructions for
compressed air tools
WARNING!
► For multiple hazards: Please ensure that you have read and
understood the safety instructions before adjusting, operating,
repairing, maintaining or replacing any accessories on the rivet
gun and before working in the vicinity of the machine. Failure to
do this can result in serious bodily injury.
PDBNP 14 A1
2
≤ 0.85 m/s
h
2
GB │ IE │
29 ■