Safety Notes; Important Notes; Connecting - Märklin 72760 Bedienungsanleitung

Safety Notes

Make sure you read the following safety notes before using
this Märklin product for the first time.
IMPORTANT! Danger of choking due to detachable small
parts that may be swallowed.
extreme swings in temperature or high humidity.

Important Notes

signal control box and must therefore be kept in a safe
place as well as transferred along with the signal control
box to third parties.
66361/66365 switched mode power packs.
Only the 72760 control boxes may be connected with
each other. The 71054 cable can be used to lengthen
the distance between control boxes. Connecting these
control boxes to other control boxes is not permissible.
The warranty card included with this product specifies
the warranty conditions.
8

Connecting

Unplug the switched mode power pack from the household
current in order to prevent damage during setup. Do not plug
the switched mode power pack in the wall outlet again until
you are finished with all of the wiring.
included with the control box.
socket 2 .
the red/brown connecting cable included with the control
box and connect to the 72760 control box. The sequence
of the connections can be done any way desired. The cri-
tical thing is the addresses set on the signals and thereby
their assignment to the control box.
Factory settings for the signals can be changed with the
Central Station 2.
!
The cable that comes with the signal control box may not
be altered.
(left or right)
1