Canon LK-62 Benutzerhandbuch Seite 9

Important
If the printer connector of the battery pack is dirty,
the printer may not operate. Keep the printer
connector clean. If it becomes dirty, wipe it clean
with a soft, dry cloth.
3
Remove the battery connector cover on
the printer.
Note
You can store the battery connector cover in the
battery attachment.
4
Attach the battery to the printer.
(1) Align the printer connector of the battery pack
with the battery connector of the printer, and
then insert the both left and right protrusions
on the battery attachment as illustrated below.
Protrusion
(2) Secure the battery to the printer by tightening
two locking screws. Tighten the screws
securely using a coin or a screwdriver.
Locking screw
LK-62_UG_MLT_body.indd 9
Battery connector cover
Battery connector
Printer connector
Note
When the battery pack is not used for a long
period of time (6 months or longer), remove the
battery from the printer. For how to remove the
battery, see "Removing the Battery from the
Printer".
Removing the Battery from
the Printer
1
Turn off the printer and disconnect the
AC adapter and USB cable from the
printer.
2
Detach the battery from the printer.
Loosen the locking screws by using a coin or a
screwdriver to detach the battery from the printer.
3
Unload the battery pack from the battery
attachment.
Unlock the lever on the battery attachment as
illustrated below, and unload the battery pack
from the battery attachment.
Lever
4
Attach the battery connector cover to the
printer.
9
2014/06/23 15:25:28