Herunterladen Inhalt Inhalt Diese Seite drucken

Starting Up - Parkside PDST 10 A2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PDST 10 A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

Operation
Mounting the air hose reel
DANGER OF INJURY!
Improper mounting of the hose drum may
cause injury.
Ensure that there are no lines or tubes at
the mounting site. Use a detector for this
if necessary or contact a specialist.
Observe the safety notes for the drill
used.
NOTE! Danger of damage!
Improper mounting may cause
damage.
Ensure that the carrier material at the
mounting site bears the weight of the
hose drum. Contact a specialist if you
have any questions.
1. Use the swivelling attachment bracket
as a template. You can disconnect the
swivelling attachment bracket
the compressed air hose reel, once you
have removed both screws
anti-clockwise (see Fig. C). For this, mark
the position of the bores on the carrier
material with a pen.
2. Drill the holes required for installation
into the carrier material.
3. Mount the swivelling attachment bracket
using the appropriate fastening mate-
2
rial (see mounting accessories
4. Reconnect the compressed air hose reel
to the swivelling attachment bracket
To do so, tighten the screws
were removed in step 1, by turning them
clockwise. (see Fig. C)
z Starting up
Connecting the air hose reel to a
compressed air source
Insert the compressed air connection
10
GB/IE/NI
of the compressed air - hose reel in the
quick coupling of the compressed air
source.
Connecting the air hose reel to a
pneumatic tool
Always observe the maximum working
pressure of the air hose reel and that the
connection pieces used match. The quick
coupling
immediate connection between it and a
pneumatic tool via its air inlet.
Using the air hose reel
2
The hose drum is equipped with a return
from
mechanism. It is operated by a strong
2
spring. If the compressed air hose
by turning
rolled up improperly there may be injuries.
8
Never let the compressed air hose
whip back uncontrolled.
If the return mechanism is damaged,
take the air hose reel out of operation
at once. Have the resulting damage
repaired by a specialist.
).
The air hose reel has a latching and
10 11
return mechanism. This permits easy
.
extension and return of the working hose
2
, which
8
This latching mechanism produces a
grinding sound at winding and un-
winding. This is not a fault. If the sound
changes after multiple uses and/or if
there are any problems with the mecha-
nism, get professional help or contact the
customer service.
7
Note: Danger of damage!
Improper handling of the air hose
reel may cause damage.
of the working hose permits
6
DANGER OF INJURY!
.
5
is
5
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis