Bosch AMAX panel 4000 EN Bedienungsanleitung Seite 14

en | Faults and Tamper Conditions
14
Fault and tamper conditions
* One or more faults occur in this category will light this led.
2013.07 | 03 | F.01U.267.114
1 Accessory Module Failure
Network / IP Module 1 Failure
1
1 - 2 Network / IP Module 1 - 2 Failure
2 Output Expansion Module Failure
1 - 2 Output Expansion Module 1 - 2 Fault
3 Input Expansion Module Failure
1 - 6 Output Expansion Module 1 - 6 Fault
Printer Failure
4
1 Module DX4010 Missing
2 Printer Missing
3 Printer Fault
RF Receiver Failure
5
1 RF Receiver 1 Fault
2 RF Receiver 1 Missing
3 RF Receiver 1 Jammed
RF Sensor Failure
6
1 RF Sensor Missing *
2 RF Sensor Fault *
7 RF Repeater Failure
1 - 8 RF Repeater 1-8 Missing
RF Config Failure
8
1 Configuration Conflict Sensors *
2 Configuration Conflict Repeaters *
3 Configuration Conflict Keyfobs *
Power Failure
2
Panel AC Failure
1
Panel Low Battery
2
Panel Aux Power Failure
3
1 - 2 Panel Aux Power 1 - 2 Fault
4 Bosch Option Bus Power Failure
1 - 2 Bosch Option Bus 1 - 2 Power Fault
5 RF Repeater AC Power Failure
1 - 8 RF Repeater 1-8 AC Power Fault
RF Repeater Battery Failure
6
1 - 8 RF Repeater 1-8 Battery Fault
RF Sensor Power Failure *
7
RF Keyfob Battery Failure *
8
User Guide
AMAX panel 4000 / AMAX panel 4000
Bosch Sicherheitssysteme GmbH
EN