Werbung
Function
This locomotive has a built-in multi-train electronic circuit and offers these
features:
• Optional operation with DC power (max. ± 18 volts DC), AC power (with
Märklin 32 VA transformer), with Märklin Delta (only with the 6607 Delta
Station), Märklin Digital (only with the Control Unit), or Märklin Systems
(Mobile Station, Central Station).
• The mode of operation is automatically recognized.
• Mfx technology for the Mobile Station / Central Station.
Name set at factory: BR 96
• 80 multi-train addresses can be set.
Address set at the factory: 09
• Adjustable acceleration (ABV).
• Adjustable Braking delay (ABV)
• Adjustable maximum speed.
• Volume can be changed for the sound effects.
• Setting the locomotive parameters electronically with the Control Unit,
Mobile Station or Central Station.
• Built-in smoke generator, can also be turned off in Märklin Systems/Digital
operation.
• The minimum usable radius is 1020 mm.
The maintenance work necessary with normal operation of this locomotive
is described below. Please see your authorized Märklin dealer for repairs or
spare parts.
Betrieb • Operation • Fonctionnement • Exploitatie
Safety Information
• Pay close attention to the safety warnings in the
instructions for your operating system.
• The feeder track must be equipped to prevent interference with radio
and television reception, when the locomotive is to be run in conventio-
nal operation. The 104 770 interference suppression set is to be used for
this purpose.
The interference suppression set is not suitable for digital operation.
• Use only transformers rated for your local hosehold power. Do not under
any circumstances use transformers rated for 220 volts or 110 volts
• Note for operation with the Mobile Station:
When there is a continued very high power consumption, the Mobile
Station shuts off completely like a short circuit. In this situation, reduce
the number of functions and then turn the system on by pressing the STOP
button again.
No warranty or damage claims shall be accepted in those cases where parts neither manufactured
nor approved by Märklin have been installed in Märklin products or where Märklin products have
been converted in such a way that the non-Märklin parts or the conversion were causal to the
defects and / or damage arising. The burden of presenting evidence and the burden of proof thereof,
that the installation of non-Märklin parts or the conversion in or of Märklin products was not causal
to the defects and / or damage arising, is borne by the person and / or company responsible for the
installation and / or conversion, or by the customer.
8
Werbung
