Herunterladen Inhalt Inhalt Diese Seite drucken

Residual Risks; Operation; Attaching/Replacing Accessories - Parkside PKGA 12 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PKGA 12 A1:
Inhaltsverzeichnis

Werbung

GB
IE
g) Always switch off the device
first and remove the recharge-
able battery
-
if you leave the tool unsupervised
-
before removing jams
-
before control- maintenance- or cle-
aning tasks
-
if you have come into contact with
a foreign object
-
whenever the machine starts to vi-
brate uncontrollably
How to avoid accidents and injuries.
h) In the case of an accident or
malfunction during operation,
the device must be switched off
immediately. Injuries must be
properly treated or medical as-
sistance sought. Read the „Trouble
shooting" section to correct any mal-
functions or contact our Service Centre.
i)
Operation of the machine in
bad weather is to be avoided,
especially if there is a risk of
lightning. There is a risk of personal
injury from an electric shock.

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Eye damage if suitable eye protection
is not worn.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
26
Warning! During operation, this elec-
tric tool generates an electromagnetic
field which, under certain circumstan-
ces, may impair the functionality of
active or passive medical implants. To
reduce the risk of serious or lethal inju-
ries, we recommend that persons with
medical implants consult their doctor
and the manufacturer of their medical
implant before operating the machine.
Warning! Observe the safety
information in the operating
instructions for your "Park-
side X 12 V TEAM" series
rechargeable battery.

Operation

Keep to noise abatement regula-
tions and other by-laws.
Attaching/replacing
accessories
Switch off the device and
remove the rechargeable
battery before attaching or
replacing accessories in order
to avoid hazards and injury.
Attaching accessories
1. Place the grass cutting blade (12), the sh-
rub cutting blade (10) or the spray attach-
ment (13) onto the plug-in connector (16)
on the bottom side of the device head (1).
2. Press the accessory into the direction of
the device head (1).
It will lock into place audibly.
Removing accessories:
3. Press the release buttons (8) on the
device head (1) and remove the acces-
sories (10/12/13).

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis