Bluetooth; Playing Back - Pioneer NC-50DAB Bedienungsanleitung

> Before Start > Part Names
®

BLUETOOTH

Pairing
1
2
Pioneer NC-50DAB xxxxxx
> Install > Initial Setup

Playing Back

1
Pioneer NC-50DAB xxxxxx
2
> Playback
Advanced Setup | Firmware Update | Others
Pairing
1. Turn the unit on.
2. When you press the
"Now Pairing... " is displayed on the display, and the
pairing mode is enabled.
Bluetooth
Now Pairing...
--:--:-- / --:--:--
3. Enable (turn on) the BLUETOOTH function of the
BLUETOOTH enabled device, then select this unit from
amongst the devices displayed. If a password is
requested, enter "0000".
0 This unit is displayed as "Pioneer NC-50DAB
XXXXXX".
4. "Now Pairing... " on the display changes to the name of
the BLUETOOTH enabled device.
0 To connect another BLUETOOTH enabled device, press
and hold the
then perform step 3 above. This unit can store the data of
up to eight paired devices.
0 The coverage area is 10 meters. Note that connection is
not always guaranteed with all BLUETOOTH enabled
devices.
Playing Back
1. Turn the unit on.
2. Perform the connection procedure on the BLUETOOTH
enabled device.
3. The input selector on this unit automatically switches to
"Bluetooth".
button on the remote controller,
button until "Now Pairing... " is displayed,
E
N
21