Fault Finding Chart; Quick Start Guide Original Instructions - Merrychef e3 Handbuch

FAULT FINDING ChART

Although every effort
pROBLEm
is made to ensure your
oven will continue
to perform to a high
The oven does not work and the display
standard, please check
screen is blank
the chart to see if
the problem can be
easily resolved before
Some screen controls do not work
contacting your service
agent.
Display warning message that the door is
open
Display warning message that the air filter
is removed
The oven does not cook the food correctly
The oven does not finish cooking
Display shows an error code
24

Quick Start Guide original instructions.

Part Number 32Z3801 GB Issue 1
pOSSIBLE CAUSE
The oven has no power
Unauthorised access
Oven door not closed
Air filter missing or incorrectly fitted
Oven not clean
Food not at correct temperature
Modified or wrong program selected
Food wrapped
Food removed early
Oven door opened
No air filter or incorrectly fitted
Oven overheating
Oven malfunction
REmEDy
Check if there is a power cut.
Check the isolator switch is ON or the oven
is plugged in correctly.
Check the oven switch is ON.
Contact the authorised user.
Remove any restriction and close the oven
door.
Refit air filter correctly.
Clean the oven (see cleaning).
Use the correct cooking program.
Unwrap food for non-microwave cooking.
Check all the cooking stages have been
followed correctly.
Close oven door.
Refit air filter.
Allow the oven to cool down.
Check and remove any restrictions around
the air vents.
Note the error code and contact your
Service Agent.