Herunterladen Inhalt Inhalt Diese Seite drucken

Brightness Limit Value - ABB Busch-Wächter GJ B000 6132 A0156 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Mode of Operation

5.3 Brightness Limit Value

The brightness limit value is defined by the brightness sensor, the lens system and the "Lux
1"
(or Lux
2) potentiometer.
The integrated light sensor continuously measures the brightness reflected on the ceiling
and compares this brightness value with the limit value set on the Presence Detector
(selectable from 5 to 1000 Lux).
NOTE
The Lux value set* refers to the brightness reflected at the Presence Detector and not
to the brightness prevailing at the workplace. As a rule, the Lux value registered by the
Presence Detector is distinctly lower than the Lux value prevailing at the workplace.
Example:
*approx. 50 Lux
5
*approx. 150 Lux >
*approx. 250 Lux >
500
100
Deactivation of brightness measurement:
>
corridor area:
office workplace:
laboratory workplace: approx. 750 Lux
approx. 200 Lux
approx. 500 Lux
GB
62

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Busch-wächter gj b000 6132 a0158

Inhaltsverzeichnis