Cassette Deck; Cassette Playback - Grundig RR 316 series Bedienungsanleitung

Compact Cassettes
• For recording, use a NORMAL
cassette (IEC type ) on wich the
I
tabs are not broken out.
This deck is not suited for
GB
recording on CHROME (IEC
or METAL (IEC ) cassettes.
IV
• For playback, any cassette type
may be inserted.
• At the very beginning and end
of the tape, no recording will
take place during the 7 seconds
when the leader tape passes the
recorder heads.
• To prevent the accidental erasure
of a recording,
keep the
1
cassette side to
be safeguarded
in front of you
and break out the left tab. Now,
recording on this side is no
longer possible.
• To render this safeguard
ineffective, cover the aperture
with a piece of adhesive tape.
• Do not expose the cassettes to
rain, moisture, sand, or to
excessive heat e.g. from heating
equipment or in motor cars
parked in the sun.
10

CASSETTE DECK

Cassette playback

• Set the MODE selector to TAPE.
• Press STOP/EJECT 9// to open
the cassette
compartment.
)
II
• Insert a
recorded
cassette.
• For fast winding, press
F.FWD Q or REW R.
• To stop, press STOP/EJECT 9//.
• Press PLAY A and playback will
start.
• Adjust the sound using the
controls VOLUME and UBS.
• You may connect stereo head-
phones with 3.5 mm plug to
p
socket .
– The loudspeakers are then muted.
• To interrupt playback press
PAUSE ;.
• To continue playback, press
PAUSE ; again.
– When the end of the tape is
reached, the recorder buttons
are released.
• Press STOP/EJECT 9// if you
want to stop playback before
the end of the tape.
On pressing again, the cassette
compartment will open.
• The set is switched off if the
MODE selector is in TAPE
position and no buttons are
pressed.
Cassette recording
Copyright: Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• Press STOP/EJECT 9// to open the cassette compartment.
• Insert the cassette.
• When monitoring during recording, adjust the sound
using the controls VOLUME and UBS. These controls do
not affect the recording.
Recording from the radio
• Set the MODE selector to RADIO.
• Select the wave band using the BAND switch.
• Tune to desired radio station using the TUNING control.
• If during the recording of a AM/MW (LW) station, a whistling sound is
heard, this sound can be suppressed by setting the BEAT CUT switch to
another position.
Mono recording from the built-in microphone
• Set the MODE selector to TAPE.
• Set the VOLUME control to the minimum volume level (during microphone
recording , monitoring is not possible).
Starting and stopping the recording
• Start recording by pressing OTR 0 (the PLAY A button is automatically
also pressed).
• For brief interruptions, press PAUSE ;.
To restart recording, press this button once more.
– When the end of the tape is reached, the recorder buttons are released.
• Press STOP/EJECT 9// if you want to stop recording before the end of
the tape.
On pressing again, the cassette compartment will open.
• The set is switched off if the MODE selector is in position TAPE and no
buttons are pressed.