Arc (Audio Return Channel) Function - Pioneer BCS-414 Bedienungsanleitung

22 Connecting
, ,
Note
y If a connected HDMI device does not accept
the audio output of the player, the HDMI
device's audio sound may be distorted or
may not output.
y When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to "Resolution Setting" on page 24.)
y Select the type of video output from the
2
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 32).
y Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
y When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
y If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of this player.
To use this function:
- Your TV must support the ARC function and
the ARC of this player must be set to On (Initial
setting is "Off").
- The setting method of ARC may differ depending
on the TV. For details about ARC function, refer
to your TV manual.
- You must use the HDMI cable (Type A, High
Speed HDMI™ Cable with Ethernet).
- You must connect with the HDMI IN of TV that
supports the ARC function using the HDMI OUT
on this player.
- You can connect only one Home Theater to TV
compatible with ARC.
- The ARC function does not warrant that the
function works in all cases even if the above
conditions are satisfied.
- When you use the ARC function, CEC (Consumer
Electronics Control) may work. If you do not want
to use CEC, you can stop it work by setting "ARC
Off" on Home Menu. In this case, it is needed to
connect TV and this player by an optical cable to
send the audio stream to this player.