Inhaltsverzeichnis
Werbung
MC+50
Care and maintenance
After using your radio
• Set to Standby.
• Switch the unit off at the mains and unplug it if you are leaving it unattended for a long
period (holidays etc).
• Avoid leaving batteries fitted if you leave the radio unattended for long periods. They
may leak and damage the radio.
CARE AND CLEANING
All care and cleaning operations should be carried out with the unit unplugged from the
mains power.
Occasionally wipe the cabinet with a lint free duster. Never
clean the unit with liquids or solvents.
Trouble shooting
PROBLEM
No sound
Static Sound
Sound is distored
Desired station not found
The display is blank
I can hear a burbling noise
on some stations
CAUSE
Volume not turned up
Signal reception too low
Volume is too high
Weak signal
This may occur if the broadcaster
changes the lable of a service or
removes a lable while tuned.
weak signal
65
SOLUTION
Adjust the main volume knob
Adjust the antenna or move
the unit to a stronger signal
location
Use the Manual Tune function
The radio will try to retune per
formance a scan.
Try re-positioning the aerial
Werbung
Inhaltsverzeichnis
