Inhaltsverzeichnis
Werbung
MC+50
FM operation
See Switching modes to switch to FM.
Scanning for stations
You can scan up or down the frequency range manually by pressing the TUNER- /
TUNER+ (main unit) or press
/
(remote) buttons to increase or decrease the
frequency in 0.05 MHZ increments.
To scan
To scan the previous or next stations by pressing and holding
the
/
buttons
(remote), or press and hold TUNER- / TUNER+ (main unit).
Scan Modes
When performing an auto scan you can set the sensitivity level of the stations to be found.
EG: strong signals only or all stations.
1. In FM mode, press the MENU button, when <Scan Setting> appears on the display
press the ENTER button to view the submenu.
2. Use the
/
buttons on the remote or PREV / NEXT(main unit) to select either ALL
STATIONS (which will detect any station, even with a weak signal) or STRONG STATION
(which will only detect stations with a good signal strength). Press the ENTER button to
select the required option.
3. When you perform a scan as described in SCANNING FOR STATIONS, only stations
fitting the applied setting will be detected.
Storing station presets
It is possible to store up to 10 of your favourite stations. This will enable you to access your
favourite stations quickly& easily.
To store a preset, you must first be listening to the station that you would like to save.
Then press & hold one of the numeric buttons from 1 - 0 to store the station under that
number. You will see Preset x Stored appear on the display with x being the number you
stored the station under.
Recalling a station preset
To select a preset, just press the required numeric button while in FM mode to activate the
station you stored.
Display modes
Every time you press the "INFO" button, the display will cycle through the following
display Modes:
Radio Text
Program Name
Program Type
Audio Mode
(Stereo/Mono)
61
Werbung
Inhaltsverzeichnis
