System-Setup - Velleman DVR1A Bedienungsanleitung

4. System Set-up
a) Open Main Menu
Press the MENU button on the front of the device. The screen
you see on the right will be displayed. You will need to enter a
password to access the main menu. Press ◄ or ► to change
digits and ▲or ▼to change the value of the digit. Press ENTER
to confirm the password.
e.g.: password: 0000 (default: 0000)
After entering the correct password and confirming it by pressing
ENTER, this display will appear:
b) System Menu
Press the MENU button on the front of the device, enter the
password and confirm it by pressing ENTER (cf. "4a: Open Main
Menu" above)
Press ▲or ▼until 'System' is selected (cf. figure on the right).
Press ENTER to enter the system set-up menu. The screen as
shown on the right will be displayed.
1) Internal Alarm Buzzer ON/FF Set-Up
1. Press ▲or ▼to choose 'Buzzer' and the ENTER button to open the buzzer menu.
2. Press ▲or ▼to switch the alarm buzzer ON/OFF: On = buzzer ON, off = buzzer OFF.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
2) HDD Overwrite Set-Up
1. Press ▲or ▼to choose HDD Overwrite and the ENTER button to open the HDD Overwrite menu.
2. Press ▲or ▼to choose HDD Overwrite : Yes / No
Yes: HDD Overwrite on. When the HDD is full, the device will start overwriting the oldest data.
No: HDD Overwrite off. When the HDD is full, the device will stop recording.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the system set-up menu.
DVR1A
► Buzzer: On
- 7 -
Password: 0000
(Menu)
► Timer
Record
Alarm
Remote
System
Event
(Menu)
Timer
Record
Alarm
Remote
► System
Event
(System)
HDD Overwrite: No
Date Display: Y-M-D
Date: 2002-JUL-14 (SUN)
Time: 22:38:29
New Password: xxxx
Clear HDD: No
System Reset: No
VELLEMAN