Control Panel Description - Velleman DVR1A Bedienungsanleitung

3. Configuration
a) Installing HDD
1) HDD Description
1. Handle of the HDD tray
2. Tray lock:
In position A (cf. drawing on the right), the tray is locked and cannot be removed.
In position B, the tray is unlocked and can be removed.
The key lock must be in position A before you switch on the device,
if not the hard disk drive cannot be used in a regular way.
3. Power indicator (green LED): lights up when the device is switched on.
4. HDD access indicator (yellow LED).
2) Installing the Hard Drive into the Tray
• Unlock the tray lock, pull out the handle and pull the tray out of the device.
• Push the release latch at the left ("OPEN") to slide the top cover backwards and remove it.
• Connect the DC power cable and IDE cable to the HDD.
• Insert the HDD in the tray and secure the HDD through the screw holes in the sides.
• Put the top cover back on the tray and slide it forward to secure it.
• Slide the tray back into the device.
3) Max. Recording Time
The recording time depends on the recording speed and quality. Please refer to the tables below:
Note: these data are the results of a test during which regular TV programs were recorded
NTSC SYSTEM
IPS
rec. Best
quality
High
Normal
Basic
HDD type
PAL SYSTEM
IPS
rec. Best
quality
High
Normal
Basic
HDD type
b) Control Panel Description
DVR1A
60 30
12hr 24hr
15hr 30hr
24hr 48hr
40hr 80hr
50 25
12hr 24hr
15hr 30hr
24hr 49hr
41hr 81hr
15 8
48hr 90hr
60hr 112.5hr
96hr 180hr
160hr 300hr
120GB
12 6
50hr 101hr
63hr 127hr
101hr 203hr
168hr 338hr
120GB
- 4 -
4 2
180hr 360hr
225hr 450hr
360hr 720hr
600hr 1200hr
3 2
203hr 304hr
253hr 380hr
405hr 608hr
675hr 1013hr
1
720hr
900hr
1440hr
2400hr
1
608hr
760hr
1216hr
2025hr
VELLEMAN