Safety Precautions; Symbols Used In The Manual; Symbols On The Implement - Parkside PLV 1500 A1 Originalbetriebsanleitung

GB IE
Weight (incl. accessories) ... approx. 13 kg
Acoustic pressure level
(L ) ...................... 82 dB (A); K
pA
Sound power level (L
Measured .... 95.5 dB (A); K
Guaranteed ......................... 98 dB (A)
Vibration (a ) ......... 3.3 m/s
n
The noise and vibration values were estab-
lished by the standards and stipulations
listed in the Conformity Declaration.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for ex-
ample, times during which the power
tool is turned off and times when the
tool is turned on but is running idle).

Safety precautions

This section covers the basic safety
instructions when working with this
implement.

Symbols used in the manual

Warning symbols with
information on damage
and injury prevention.
22
= 3 dB
pA
)
WA
= 1.92 dB
WA
2 ; K= 1.7 m/s
Instruction symbols (the in-
struction is explained at the
place of the exclamation
mark) with information on
preventing damage.
Help symbols with information
2
on improving tool handling.

Symbols on the implement

Caution!
These Instructions must be
read.
Danger of injury due to
l ung-out material! Keep by-
standers well away from the
implement.
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept well
away from the implement
and its cutting tools.
Wear eye and ear protection.
Caution! - Sharp tools. En-
sure that the hands and feet
are kept well away from
the cutting tools. The cutting
cylinder continues to rotate
briel y after the motor has
been switched off.
Always disconnect the plug
from the mains prior to
maintenance work or if the
power cable is damaged.
Do not expose the device to
moisture. Never operate the
device in rain.