Herunterladen Inhalt Inhalt Diese Seite drucken

General Safety Instructions For Power Tools; Safe Operation - Parkside PSS 65 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PSS 65 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 79
General Safety Instructions
for Power Tools
WARNING! Read all safety in-
structions and guidelines care-
fully. Failure to follow the safety
instructions and guidelines may result
in electric shock, fire and/or serious
injuries.
The term „power tool" used in the safety
instructions refers to mains-operated electric
tools (with a mains cable) and to battery-op-
erated electric tools (without a mains cable.

Safe operation:

Keep work area clear. Cluttered
areas and benches invite injuries.
Consider work area environ-
ment.
- Do not expose tools to rain. Do not
use tools in damp or wet locations.
Water entering a power tool will in-
crease the risk of electric shock.
- Keep work area well lit.
- Do not use tools in the presence of
flammable liquids or gases.
Power tools create sparks which may
ignite the dust or fumes.
Guard against electric shock.
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radia-
tors, ranges, refrigerators).
Keep other persons away.
Do not let persons, especially children,
not involved in the work touch the tool
or the extension cord and keep them
away from the work area.
Store idle tools. When not in use,
tools should be stored in a dry locked-
up place, out of reach of children.
Do not force the tool. It will do
the job better and safer at the rate for
which it was intended.
Use the right tool.
- Do not force small tools to do the job
of a heavy duty tool.
- Do not use tools for purposes not
intended; for example do not use cir-
cular saws to cut tree limbs or logs.
Use of the power tool for operations dif-
ferent from those intended could result in
a hazardous situation.
Dress properly.
- Do not wear loose clothing or jewel-
lery, they can be caught in moving
parts.
- Anti-slip footwear is recommended
when working outdoors.
- Wear protective hair covering to con-
tain long hair.
Use protective equipment.
- Use safety glasses.
- Use face or dust mask if working op-
erations create dust.
Connect dust extraction equip-
ment. If the tool is provided for the
connection of dust extraction and col-
lecting equipment, ensure these are
connected and properly used.
Do not abuse the cord. Never
yank the cord do disconnect it from the
socket. Keep the cord away from heat,
oil and sham edges.
Secure work. Where possible use
clamps or a vice to hold the work. It is
safer than using your hand.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the power
tool in unexpected situations.
Maintain tools with care.
Many accidents are caused by poorly
maintained power tools.
- Keep cutting tools sharp and clean
for better and safer performance.
- Follow instruction for lubricating and
G B
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis